Dukane 8944 user manual Date/Time Settings Continued, SNTP Server IP Address

2.Equipment connection and network setting

2.5Configuring and controlling the projector via a web browser (Continued)

2.5.7 Date/Time Settings (Continued)

Item

Description

Daylight Savings Time			Click the [ON] check box to enable daylight savings time and
			set the following items.
	Start		Configures the date and time daylight savings time begins.
		Month	Configures the month daylight savings time begins (1~12).
		Week	Configures the week of the month daylight savings time
			begins (First, 2, 3, 4, Last).
		Day	Configures the day of the week daylight savings time begins
			(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
		Hour	Configures the hour daylight savings time begins (0 ~ 23).
		Minute	Configures the minute daylight savings time begins (0 ~ 59).
	End		Configures the date and time daylight savings time ends.
		Month	Configures the month daylight savings time ends (1 ~ 12).
		Week	Configures the week of the month daylight savings time ends
			(First, 2, 3, 4, Last).
		Day	Configures the day of the week daylight savings time ends
			(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
		Hour	Configures the hour daylight savings time ends (0 ~ 23).
		Minute	Configures the minute daylight savings time ends (0 ~ 59).
Time difference			Configures the time difference (hours:minutes).
			Set the same time difference as the one set on your PC. If
			unsure, consult your network administrator.
SNTP			Click the [ON] check box to retrieve Date and Time
			information from the SNTP server and set the following items.
	SNTP Server IP Address		Configures the SNTP server address in IP format.
	Cycle		Configures the interval at which to retrieve Date and Time
			information from the SNTP server. (hours:minutes).

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed, The network connection can be restarted using [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•To enable the SNTP function, the time difference must be set.

•The projector will retrieve DATE and TIME information from the timeserver and override time settings when SNTP is enabled.

•The Internal Clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

35