Dukane 8944 user manual OPTION Menu continued, Using the Transition Detector Function, 2#55914

OPTION Menu

OPTION Menu (continued)

Item

Description

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

•Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle and mirror setting will be recorded.

•This feature may not function properly if the projector is not in a stable position when TURN ON is selected.

64#05+6+10&'6'%614

674010

67401((

Transition Detector

on/off menu

SECURITY (continued)

4.1-2 If this function is set to TURN ON when the	64#05+6+10&'6'%61410
vertical angle of the projector or mirror setting	HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP
at which the projector is turned on is different	6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF
	+H[QWYKUJVQJCXGCUSWCTGKOCIG
than the previously recorded the Transition	2+0 $1:
	FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW
	QPUETGGPCICKP
Detector Alarm will be displayed and the	Transition Detector Alarm
projector will not display the input signal.

Set the Transition Detector off I the SECURITY menu to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.

4.2 Setting the Transition Detector PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu.

4.2-2 Use the ▲/▼ buttons on the Transition	64#05+6+10&'6'%614
Detector on/off menu to select TURN ON.	'06'42#55914&
The ENTER PASSWORD BOX (small) will be		
displayed.
	37+6			0':6
4.2-3 Use the ▲/▼/◄/► buttons to enter a	ENTER PASSWORD
PASSWORD. Move the cursor to the right side of			BOX (small)
	64#05+6+10&'6'%614
the ENTER PASSWORD BOX (small) and press
	%*'%-2#55914&
the ► button to display the CHECK PASSWORD
		
BOX, enter the same PASSWORD again.
4.2-4 Move the cursor to the right side of the	37+6			0':6
	CHECK PASSWORD
CHECK PASSWORD BOX and press the
			BOX
► button to display the PASSWORD for	64#05+6+10&'6'%614
about 20 seconds, please make note of the	%1/2.'6'
PASSWORD during this time.			
Pressing the ENTER button on the remote control or
	'06'4			':+6
the INPUT button on the projector will return to the
			PASSWORD BOX
Transition Detector on/off menu.

• Please do not forget your Transition Detector PASSWORD.

(continued on next page)

52