Manuals / Dukane / Computer Equipment / Projector

Dukane 8944 user manual

Models: 8944

1 178

Download 178 pages 47.86 Kb

Page 66

Manual background

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects.

64

After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.

1.

2.

Caring for the cabinet and remote control

Incorrect care could have adverse influence such as discoloration, peeling paint, etc.

After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.

1.

2.

Maintenance

Other care

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.

Caring for the lens

If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling.

Image 66

Dukane 8944 user manual

Contents

LCD Projector ModelUSER’S MANUAL 401-8944-00Page About this manual 8944Users Manual - Operating Guide ProjectorProjector features ContentContent Setting upPreparations Projector featuresContents of package Fastening the lens coverPart names ProjectorControl panel Rear panelRemote control WARNING Do not look into the beam outlet andSetting up Arrangement On a horizontal surfaceSuspended from the ceiling Adjusting the projectors elevator Using the security bar and slotConnecting your devices Connecting your devices continued About Plug-and-Play capabilityInserting an SD card and USB memory How to use the slot cover lock Connecting power supplyRemote control Laser pointerPutting batteries to use the remote control in an area free from About the remote control signalChanging the frequency of remote control signal signal to the projectorUsing as a wired remote control Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal continued Searching an input signalSelecting an aspect ratio Press the SEARCH button on the remote controlUsing the automatic adjustment feature Adjusting the zoom and focusAdjusting the lens shift  For an M1-D signalAdjusting the position Correcting the keystone distortionsPress the ON button of MAGNIFY on the remote control Using the magnify featureFreezing the screen 1. The “MAGNIFY” indication will appear on the screenTemporarily blanking the screen Using the menu function In the EASY MENUIn the Advanced MENU EASY Menu EASY MenuEASY Menu continued Performing this item resets all of the EASY MENU items except thePerforming this item resets the filter time which counts usage time Select “Go to Advanced Menu…” on the menu, and press thePICTURE Menu To adjust CUSTOMLOW DEFAULT LOW CUSTOM Hi-BRIGHT-1 DEFAULT Hi-BRIGHT-1 CUSTOM To adjust CUSTOMHIGH DEFAULT HIGH CUSTOM MID DEFAULT MID CUSTOM Hi-BRIGHT-2 DEFAULT Hi-BRIGHT-2 CUSTOMPICTURE Menu continued PRESENTATION ó THEATER ó TURN OFFIMAGE Menu IMAGE MenuIMAGE Menu continued INPUT Menu 8+&1 INPUT Menu continued58+&1 #761Using the / buttons turns the frame lock function on/off INPUT Menu continuedThe RESOLUTION menu will be displayed INPUT Menu continuedINPUT Menu SETUP Menu SETUP MenuKEYSTONE SETUP Menu continuedDescription WHISPERAUDIO Menu ó MNORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語 SCREEN MenuSCREEN Menu ó ó SVENSKA óSCREEN Menu continued continued on next pageMyScreen When the registration is completed, the registered screen and theSCREEN Menu continued following message is displayed for several secondsWhen the TURN ON is selected, the following message function works SCREEN Menu continuedOPTION Menu OPTION MenuOPTION Menu continued OPTION Menu continued This item is to assign one of the following function to MY BUTTONOPTION Menu continued continued1 ó 2 ó 3 ó 4 ó 4/164%+8 OPTION Menu continued 4106This projector is equipped with security functions 1. Using Security FeaturesOPTION Menu continued OPTION Menu2. Using the MyScreen PASSWORD Function OPTION Menu continuedOPTION Menu 3. Using the PIN LOCK Function OPTION Menu continuedOPTION Menu 3.1-3 Input a 4 part PIN Code using the /// /RGB and INPUT buttons OPTION Menu continuedOPTION Menu 4. Using the Transition Detector FunctionOPTION Menu continued %-2#5591464#05+6+10&6%614 OPTION Menu continuedOPTION Menu 0642#55914MIU Menu Network Settings of the User’s Manual - Network FunctionsMIU Menu continued To switch the image displayedSETUP DHCP Dynamic Host Configuration Protocol OperationDEFAULT GATEWAY MIU Menu continued+2#&&455 92#25- #5 MIU Menu continued0%426+10 92#25- #5REMOVE ALL, REMOVE SD CARD, REMOVE USB MIU Menu continuedMIU Menu MIU RESTARTIn case of replacement by yourself MaintenanceLamp Type number =HIGH VOLTAGE HIGH TEMPERATURELamp warning HIGH PRESSUREAir filter Type number = MU03642 Cleaning the air filterAir filter continued only. Use of another battery may present a risk of fire or Internal clock batteryReplace battery with HITACHI MAXELL, Part No.CR2032  2.5.7 Date/Time Settings of the - Network Functions SectionPage There is no input signal TroubleshootingRelated messages The internal temperature is risingThe projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is warming upAt least 1 “Power ON” schedule is saved to the Regarding the indicator lamps continuedIt is time to clean the air filter The cooling fan is not operatingThe signal cables are not correctly connected The electrical power cord is not plugged inThe power switch is not set to the on position Signal source does not correctly workThe AUDIO setting is not correct The signal cables are not correctly connectedThe volume is adjusted to an extremely low level The signal cables are not correctly connectedextremely low level The brightness and/or contrast are adjusted to annot properly adjusted The WHISPER function is workingWarranty and after-service SpecificationNOTE These specifications are subject to change without notice Specifications continued SpecificationsModel 8944 Example of computer signalUsers Manual Technical ProjectorInitial set signals Initial set signalsConnection to the ports A RGB IN1, B RGB IN2, C RGB OUTD M1-D I VIDEO COMPONENT VIDEO E Y, F CB/PB, G CR/PRH S-VIDEO Connection to the ports continuedAUDIO IN 3 L R, M L, AUDIO IN 4 N R, O L Q REMOTE CONTROLJ AUDIO IN 1, K AUDIO IN P AUDIO OUTS LAN T AUX I/OU SD card slot RS-232C Communication Connecting the cableCommunications setting 3. Command dataUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandFilter missing errorInner Sencer error RS-232C Communication continuedRS-232C Communication continued RS-232C Communication continued RS-232C Communication continued RS-232C Communication continued TREBLE-RGB1 VOLUME - MIURS-232C Communication continued TREBLE-RGB2RS-232C Communication continued SRS WOW - ComponentRS-232C Communication continued RS-232C Communication continued RS-232C Communication continued RS-232C Communication continued User’s Manual - Network Functions Section 8944Projector 2. Equipment connection and network setting … …………………………… ContentsContents 2.2 Network connection using “One-Click-Communication”Country or Region Available ChannelTaiwan Page 1. Main functions 1.1 Live Mode Project images from PC1.2 PC-LESS Presentation Display the images stored in SD card/USB memorySupported memory cards 1.2 PC-LESS Presentation Display the images stored in SD card/USB memory. Continued2.1 Required equipment preparation 2. Equipment connection and network setting2.2 Network connection using “One-Click-Communication” function Wired LAN connectionwSelect the MIU menu by using / button 2.3 Manual network connection setting - Wired LAN Wireless LAN connection2.3.1. Equipments connection 2.3.2. Network settings 8 Set IP address, subnet mask and default gateway for PC About IP address Click 2.3.3 “Internet Option” settingClick Fig. 2.3.3.a “Network and Internet Connections” windowFig. 2.3.3.c “Local Area Network LAN Settings” window 2.3.4 Check connectionFig. 2.3.4 “Logon Menu” 2.4 Manual network connection setting - For wireless LAN 2.4.1 Preparation for wireless LAN connection2.4 Manual network connection setting - For wireless LAN Continued 2.4.2 Wireless LAN connection set up2.4 Manual network connection setting - For wireless LAN Continued 5 Open “Wireless Networks” tab. Fig. 2.4.2.c2.5 Configuring and controlling the projector via a web browser 2.4 Manual network connection setting - For wireless LAN ContinuedPage Logon 2.5.1 Network Information Displays the projector’s current network configuration settings2.5.2 Network Settings Displays and configures network settings2.5.2 Network Settings Continued Click the Apply button to save the settings2.5.3 Port Settings 2.5.4 Mail Settings 2.5.5 Alert Settings Displays and configures failure & warning alerts2.5.5 Alert Settings Continued 2.5.5 Alert Settings Continued 2.5.5 Alert Settings Continued 2.5.5 Alert Settings Continued Click the Apply button to save the settings2.5.6 Schedule Settings Displays and configures schedule settings2.5.6 Schedule Setting Continued Click the Apply button to save the settings2.5.7 Date/Time Settings 2.5.6 Schedule Setting Continuedinformation from the SNTP server and set the following items 2.5.7 Date/Time Settings ContinuedConfigures the week of the month daylight savings time ends SNTP Server IP Address2.5.8 Security Settings Displays and configures passwords and other security settings2.5.8 Security Settings Continued Re-enter Authentication2.5.9 Projector Control Controls the projectorAuto Keystone Execute Turns the Automatic keystone distortion correction function On/Off 2.5.12 Logoff 2.5.10 Projector Status2.5.11 Network Restart Displays and configures the current projector status2.6 Utilize Web Remote Control 2.6 Utilize Web Remote Control Continued 3.1.1. Install “MIU Live Viewer” 3. How to use Projector software - Basics3.1 How to use “MIU Live Viewer” Minimum PC Hardware and Software Requirements3.1 How to use “MIU Live Viewer” Continued 3.1.2. Software Installation Procedureq e s 3.1 How to use “MIU Live Viewer” Continued3.1.3 Explanation of “MIU Live Viewer” 3.1 How to use “MIU MIU Live Viewer” Continued “MIU Live Viewer” window Fig. 3.1.3.a3.1 How to use “MIU Live Viewer” Continued “Options” window “General” tab, Fig. 3.1.3.b3.1 How to use “MIU Live Viewer” Continued JPEG tab Icon in task tray3.1.4 Utilize “MIU Live Viewer” - Basic 3.1 How to use “MIU Live Viewer” Continued 3 Perform following operations on “MIU Live Viewer”3.2 Utilize “PC-LESS Presentation” - Basic 3.1 How to use “MIU Live Viewer” Continued3.2 Utilize “PC-LESS Presentation” -Basic - Continued 4. Utilize projector - Advanced 4.1. Utilize “MIU Live Viewer” - Advanced 4.1. Utilize “MIU Live Viewer” - Advanced - ContinuedConnection 4.2 Utilize “PC-LESS Presentation” - Advanced 4.2 Utilize “PC-LESS Presentation” - Advanced - Continued 4.2.1 Thumbnail displayFollowing operations can be accessible while thumbnail is displayed 4.2 Utilize “PC-LESS Presentation” - Advanced - Continued4.2 Utilize “PC-LESS Presentation” - Advanced - Continued 4.2.2 Display in full screenFull-screen Display Fig.4.2.2 Full-screen Display Pattern A Pattern B4.2 Utilize “PC-LESS Presentation” - Advanced - Continued 4.2.3. Slide showFull-screen Display Fig. 4.2.3 Slide show 4.2 Utilize “PC-LESS Presentation” - Advanced - Continued You can also play the Slide show with the projector MenuImage display preview 4.2 Utilize “PC-LESS Presentation” - Advanced - Continued4.2.4 Directory display File informationPage 4.2 Utilize “PC-LESS Presentation” - Advanced - Continued File information display2%.5524506#6+10 Error message 4.2.5 “PC-LESS Presentation” error message“PC-LESS Presentation” error message list Error content4.3 Playlist 4.4 Failure & Warning Alerts via E-mail Mail Settings 26Example If the IP address of the projector is set to Mail Settings Continued 4.5 Projector management via SNMP SNMP settings 25Example If the IP address of the projector is set to 4.6 Controlling the Projector via Scheduling Date/Time Settings 34 Internal clock battery of the Users Manual - Operating GuidExample If the IP address of the projector is set to Schedule Settings 32 Example If the IP address of the projector is set to4.7 e-SHOT Still Image Transfer Display Communication Port 4.8 Command Control via the NetworkCommand Control Settings 25 Example If the IP address of the projector is set toCommand Control Settings Continued RS-232Ccommand Command formatError code Send Data formatReply Data format Authentication Automatic Connection BreakProblem 5.Troubleshooting5. Troubleshooting Likely CauseWireless 5. TroubleshootingProblem Likely Cause6. Specifications 6. SpecificationsSpecifications 7. Warranty and After-sales service 7. Warranty and After-sales serviceToll-free Audio Visual Products2900 Dukane Drive St. Charles, Illinois