Dukane 8944 user manual    , Utilize “MIU Live Viewer” - Advanced - Continued, Connection

4. Utilize projector – Advanced -

4.1. Utilize “MIU Live Viewer” – Advanced - (Continued)

[Connection]

1)Connect all PCs and projector using LAN cables and hub as shown in fig. 4.1.1.a. Connect projector and output monitor with RGB cable.

2)Start up “MIU Live Viewer” in each PC. Check the IP address in PCs and confirm xxx of [192.168.1.xxx] in IP address is set different value in each PC.

3)Click “Find” button in “MIU Live Viewer” and search projector.

4)When projector is found, click “Option” button in “MIU Live Viewer”. Then open “General” tub and select the number of PCs to connect as MultiPC Mode. After selecting, click “Close” button.

5)Click Capturing Start button.

6)Repeat from 3) to 5) to all PCs.

* Display screen priority

In case of multiple PCs connection, priority is decided automatically comparing when each PC is connected. In each mode, priority is as shown in fig. 4.1.1.b. (Smaller number is prioritized.)



2%

				
	
				
2%U			2%U

Fig. 4.1.1.b Priority in each mode





2%U

Detailed conditions and specifications for priority are as follows.

a)The priority is high the PC that connects later.

b)When Multi PC Mode (2 to 4 PCs) is changed to 1 PC, changed 1 PC has highest priority.

c)Multi PC Mode can be changed settings freely even the PC is communicating.

d)When the lower number than connected PCs is selected, lower priority PC screens are not displayed, but connections with projector are kept.

When more than 5 PCs are connected with projector, lower priority PC connection is disconnected.

NOTE • When Multi PC is selected, if the screen resolution on one of PCs is changed, the PC will be given the top priority, so the mode (1 to 4PCs) set on the PC will be effective on the projector.

•On Multi PC Mode, actual image resolution of each screen is 1/4 of the original, then small letters or lines might be hard to be illegible.

It is recommended to use letters as large as possible. Or try manual H.Phase adjustment which might improve image quality.

55