FoodSaver Vac800/Vac820 How To Vacuum Package Using FoodSaver Universal Lids, See page 14, steps

T H E F O O D S A V E R U S E R M A N U A L

How To Vacuum Package Using FoodSaver Universal Lids

The Universal Lid is ideal for keeping foods, such as sauces, peanuts and coffee, fresh longer in their original containers. These lids work with metal cans, thick glass jars and rigid plastic containers. Remember, perishable goods should still be refrigerated. Also, if you plan to store food in cans for more than a day, it is advisable to transfer food into a plastic or glass container to prevent “off-flavor” from developing from the can.

CAUTION: FoodSaver Universal Lids are not to be used with thin glass, crystal, plastic or aluminum containers. The force exerted by the FoodSaver vacuum packaging system is very powerful and could implode a thin glass or a non-rigid container.

1Turn the knob on the lid so the arrow points to “Vacuum.”

2Place lid on top of the open container. Leave at least one inch between the contents and the rim of the container.

3Insert one end of the Accessory Hose into the Accessory Port on the appliance. Insert the other end of the Accessory Hose into the hole on the top of the Universal Lid. Twist the gray hose fitting while inserting to ensure a tight fit.

4With one hand press down on the center of the lid of the appliance to activate the vacuum. With the other hand, press down on the Universal Lid until the vacuum takes hold (this may take 3-5 seconds).

T H E F O O D S A V E R U S E R M A N U A L

5Once the vacuum takes hold on the container, both hands can be used to finish the vacuum process. Continue with vacuum pack- aging as you would a Square Canister or Bulk Storage Canister.

(See page 14, steps 5-7.)

Note: Pressing down on the lid with one hand may require additional effort.

IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fit- ting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.

How to Open the FoodSaver Universal Lid

To open the FoodSaver Universal Lid, turn the knob so the arrow points to “Open.” This will release the vacuum and allow the lid to be removed.

18 19