FoodSaver Vac800/Vac820 manual How to Vacuum Package Using FoodSaver Bottle Stoppers

Models: Vac800/Vac820

1 20
Download 20 pages 62.33 Kb
Page 12
Image 12

T H E F O O D S A V E R U S E R M A N U A L

How to Vacuum Package Using FoodSaver Bottle Stoppers

FoodSaver Bottle Stoppers are the best way to keep wine, oils and non-carbonated bottled liquids fresh longer. You will keep their delicate taste from going stale by not exposing the liquids to air.

FoodSaver Bottle Stoppers are not to be used with plastic bottles. Also, do not use with any carbonated or sparkling beverages. Carbonation happens under pressure. A vacuum removes this pressure, releasing the bubbles and causing the beverages to become flat.

1Insert the Bottle Stopper into the neck of the bottle. Leave at least one inch between the contents and the bottom of the Bottle Stopper.

2Insert one end of the Accessory Hose into the Accessory Port on the appliance. Insert the other end of the Accessory Hose into the hole on the top of the Bottle Stopper. Twist the gray hose fitting while inserting to ensure a tight fit.

3Vacuum package as per instructions on page 10, steps 6-8.

IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fitting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.

How to Remove the FoodSaver Bottle Stopper

To remove a FoodSaver Bottle Stopper, simply twist and pull up on the Bottle Stopper to release the vacuum.

T H E F O O D S A V E R U S E R M A N U A L

Care and Cleaning Instructions

The FoodSaver Vac 800/Vac 820

1Always unplug the appliance before cleaning.

2Do not immerse the appliance in water.

3Do not use abrasive products or materials to clean any of the appli- ance components. Such cleaners can scratch the surfaces and damage the black foam rubber pads, preventing a vacuum from forming.

4Clean using a mild dishwashing soap and a warm, damp cloth. Wipe away any food residue from inside or around the Vacuum Channel, Sealing Strip and black foam rubber pads.

5Dry thoroughly before using.

FoodSaver Bags

1Wash bags in warm water using a mild dishwashing soap.

2Bags can be washed in the dishwasher by carefully turning the bags inside out and spreading them over the top rack of the dish- washer so that all surfaces are exposed to the washing water.

3Allow bags to dry thoroughly before reusing.

IMPORTANT: Do not reuse bags that have been used to store raw meats or fish. Also, bags may not be reusable if they have been used to store greasy or fatty foods. Do not reuse bags that have been microwaved or boiled.

FoodSaver Accessories

1All FoodSaver accessories should be washed in warm water using a mild dishwashing soap.

2Dry thoroughly before using.

3All FoodSaver Canister bases (but not the lids) may be washed in the dishwasher.

4Bulk Storage and Square Canister bases (but not the lids) may be used to reheat foods in the microwave.

5Designer Canister bases and lids are not to be used in the microwave.

20

21

Page 12
Image 12
FoodSaver Vac800/Vac820 manual How to Vacuum Package Using FoodSaver Bottle Stoppers, Care and Cleaning Instructions