Dukane 8944 user manual Projector management via SNMP, SNMP settings 25

4. Utilize projector – Advanced -

4.5 Projector management via SNMP

When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a specified PC.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP settings (25)

Configure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10/:

1)Enter [http://192.168.1.10] into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click the [Enable] check box to open the SNMP Port.

Set the IP address to send the SNMP Trap to when a Failure/Warning occurs.

NOTE • A Network Restart is required after the SNMP Trap configuration settings have been changed. Click [Network Restart] and configure the following items.

5)Click [Security Settings] on the main menu.

6)Click [SNMP] and set the Community Name on the screen that is displayed.

NOTE • A Network Restart is required after the Community Name has been changed.

• Click [Network Restart] and configure the following items.

7)Configure the settings for Trap transmission of Failures/Warnings. Click [Alert Settings] on the main menu and select the Failure/Warning item to be configured.

8)Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear the [Enable] check box when SNMP trap transmission is not required.

9)Click the [Apply] button to save the settings.

70