Dukane 8944 user manual Troubleshooting, Problem, Likely Cause, Things to Check

5. Troubleshooting

5.Troubleshooting

Problem

No image

		The projector
		that you want
		to connect to
		is nowhere
		to be found
		on the list
		of available
Wireless / Wired		projectors
	Live Mode	Can't
		communicate
		The projected
		image is
		rather slow
		compared to
		that of the PC

(continued on next page)

		Reference
Likely Cause	Things to Check	Page
		Number
The projector is not turned	Is the projector's lamp on?	*17
on.
The projector's input source	Is the projector switched to	*18
isn't switched to MIU.	MIU?
	Check both the PC
	and projector's network
	settings. If you change the
	projector's settings, turn off
The PC and/or projector's	the projector's AC power
	and then turn it on again.
network settings are not		8, 10, 16
	If you simply put the
configured correctly.
	projector in STANDBY
	power mode and then
	turn it on again, the new
	settings might not take
	effect.
	• Bring the PC and
	projector closer together
Weak radio signal	• Radio waves won't go	–
	through concrete and
	metal (steel doors, etc.)
The Projector isn't in Live	Check the mode on MIU
	Menu to make sure that it is	50
Mode
	in the correct mode.
The projector isn't capable	Try increasing the Capture
of relaying dynamic images	Performance priority level.	48
such as PowerPoint®	It may improve the speed a
animation at full speed.	little.
	Try setting the image
The compression rate	compression to "Low."
being used for transferring	The resolution will drop	48
the images is too low.	in quality, but it may help
	improve the speed.

80