Panasonic PT-D995U Video button, Quick ALIGN. button, When a menu is shown, Computer button

Controls and Features (cont.)

Control Panel (Cont.)

STAND BY

LAMP

TEMP

EMERGENCY

VIDEO

COMPUTER

SETTING

QUICK

ALIGN.

VIDEO button

Use this button to select a device such as a video deck connected to the AV IN terminal of the projector. Each time you press the button, the device selected changes as follows:

Y/C VIDEO Y,PB/B-Y,PR/R-Y

QUICK ALIGN. button

While a menu screen is shown, use this button to adjust the values for the item selected. When no menu is shown, the quick alignment function works.

When a menu is shown

+button: The value for the selected item increases.

-button: The value for the selected item decreases.

When no menu is shown

Press the + button and - button at the same time:

QUICK ALIGNMENT is displayed on the screen and the quick alignment function works (TRACKING, PHASE, H. POS. and V. POS. are automatically adjusted). When the adjustment is finished, the display goes off automatically.

The quick alignment function :

Works for computer input (COMPUTER- 1 and - 2 input terminals) signals.

Does not work for video input (AV IN input terminal) signals.

Automatic adjustment with the quick alignment function should be done on a bright still-picture screen. This function may not work correctly on a dark screen or motion-picture screen. If adjustment with this function is not satisfactory, adjust TRACKING, PHASE, H. POS. and V. POS. manually (see pages 33, 39 and 40).

COMPUTER button

Use this button to select a device connected to the COMPUTER -1 or -2 terminals. Each time you press the button, the selection changes as follows:

COMPUTER 1 COMPUTER 2

SETTING button

Use this button to call up the setting menu. For details, refer to “Making Basic Settings” on page 33.

12