Changing the Color System | Panasonic PT-D995U specification

: Forward /

AUTO

NTSC

NTSC4.43

PAL

SECAM

Operating the Main Menu (Cont.)

Changing the Color System

Remote control unit

MENU/ENTER

button

Cursor buttons

PAGE BACK button

Main menu

AUTO is set for the color system when the projector is shipped from the factory. Normally, use it in AUTO. If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input.

Press the MENU/ENTER button.

The main menu is shown on the screen.

Select “DECODER” with the cursor button or •

The selected item (displayed in text) is shown in magenta color on the screen.

Set the color system with the cursor button or •

Each time you press the cursor button or , the color system changes as follows.

: Backward

Normally, set to AUTO. The color system of a signal being input is automatically identified.

Dedicated to NTSC.

Dedicated to NTSC4.43.

Dedicated to PAL.

Dedicated to SECAM.

Color system (DECODER) display

When computer-related signal is input, the display of the color system is changed to gray color, making operation impossible. When video signals from AV devices are input, the item for the color system can be set.

About automatic signal identification

AUTO is selected when shipped from the factory. In AUTO, the color system (DECODER) of the signal being input is automatically identified and indicated in ( ). Refer to the main menu display.

If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input. When the dedicated color system is set, be careful as automatic identification does not work.

To finish the main menu, press the PAGE BACK button.

37

Image 37

Panasonic PT-D995U Changing the Color System, Press the MENU/ENTER button, Select Decoder with the cursor button or

Contents

Operating Instructions Dear Panasonic Customer Safety Precautions Safety Precautions Be sure to ask your dealer to install the unit Contents Remote control unit TNQE168 AAA/R03-size dry cell battery AccessoriesApprox .5 m 4.92 ft Front Side /Top Surface / Right Side Controls and Features Main Power switch AC in power input terminalConnector panel Adjustable foot for horizontal angle adjustment Air intake area filter Bottom SurfaceOpening for replacing the light-source lamp Fixing foot Control Panel Setting button When a menu is shownVideo button Quick ALIGN. button Connector Panel Computer in computer input -1 connector D-sub 3- row 15 pin Input of external sync signals is automatically detectedComputer in computer input -2 terminals BNC Audio input terminal stereo mini jack Remote Control Unit Install the batteries Installing BatteriesPrecautions for using batteries Open the back cover Precautions for Installation Installing the Projector Projection Distance and Screen Size Installing the ProjectorAccording to aspect ratio Projection screen size diagonal length For 16 9 aspect ratio screens For 4 3 aspect ratio screensProjection Distance Effective range and distance of the remote control unit Effective Range and Distance of the Remote Control Unit Signals that Can Be Input to the Projector Connecting to Various DevicesVideo signals Response to color systems Response to double density *1, high-vision signals Connecting to Hi-Vision Devices Connecting to Video DevicesVideo devices Hi-Vision devices Connecting to Devices which Control the Projector Connecting to Other DevicesDesktop type To Audio OUT Connection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesRGB output devices Connection to Macintosh To use the projector Connecting the Power Cord SuppliedRemove the lens cap When Turning On the Devices Connected to the Projector Basic Operations Turning on the Power When you press Computer When you press VideoTo reduce the screen size Button To focus on nearer points When using the projector When using the remote control unitProjector’s button To turn off video image and audio sound temporarily Press the projector’s Setting button To display the Setting menuPress the remote control’s MENU/ENTER button To use the remote control’s Preset button Making Basic Settings Operating the Setting MenuPress the Setting button of the projector Press the Setting button to select the desired item Pixel Clock Tracking Operating the Main Menu Source Decoder Language Configuration of the Main Menu Computer-related input Operating the Main Menu Basic Operation of the Main Menu Remote control unitMain menu Press the MENU/ENTER button Changing the Color SystemSelect Decoder with the cursor button or Set the color system with the cursor button or Select Language with the cursor button or Changing the Language DisplaySet the desired language with Cursor Button FRANÇAlS Adjust Tracking and Phase with the cursor buttons Adjusting the Pixel ClockSelect Pixel Clock with the cursor Button or Adjust H. POS. and V. POS. with the cursor buttons Adjusting the Screen PositionSelect Position with the cursor button or Submenu items of the Position menu appear on the screen Select the item to adjust with the cursor button or Adjusting Picture QualityWhen AV signals are input When computer-related signals are input Submenu items Make Adjustment with the cursor ButtonFor video system input For computer system input Brightness Contrast Gain Text Mode Adjust Treble and Bass with the cursor buttons Adjusting Sound QualitySelect the Sound with the cursor button or Select the item to set adjust with the cursor button or Setting and Adjusting Other Functions OptionsFollowing optional functions can be set adjusted Select the Options with the cursor Adjustment item To adjust multiple items, repeat steps 4ButtonAdjustment content Options menu Temperature Adjustment contentColor temperature increases 1 6 Select a submenu item Source using the cursor button or Changing Setting the SourceSelect the item to set using the cursor Buttons or When other than Auto is selected When Auto is selectedSubmenu item Press the MENU/ENTER button to set fix it Loosen the two screws with a flat-end screwdriver Replacing the Light-Source LampBe careful not to damage the claw Insert the new lamp unit fully inside and fasten the screws Turn on the Main Power switch to go into stand-by mode Resetting the Lamp Use TimeMain Power switch Control panel Stand by and Operate indicators come on at Same time Turn off the Main Power switch Cleaning and Replacing the FilterClean the filter Reinstall the filter Symptom Probable cause TroubleshootingCorrective action Video image dims Color is poor or unstable Stains on the cabinet MaintenanceStains on the lens AV in AV input SpecificationsComputer in Computer input Other Computer OUT Computer output Top Outside dimensionsFront Unit inch mm Protrusion excluded RS-232C connector Pin assignment Specifications for connectors/terminalComputer IN-1 PC / Computer OUT connector Terminal Executive Office Panasonic Broadcast & Television Systems CompanyPanasonic Canada Inc LCT0294-001B