Controls and Features (cont.)
Connector Panel
Y/C (S video) input terminal (Mini DIN 4 pin)
Connect this terminal to the S video output terminal of a video deck, etc.
VIDEO (composite video) input terminal (BNC)
Connect this terminal to the composite video output terminal of a video deck, etc.
Y, PB/B-Y, PR/R-Y input terminals (BNC)
These are input terminals for component (Y,
AUDIO L/R (Audio left/right) input terminals (pin jacks)
Of devices connected to the video input terminals, such as a video deck, etc., the audio output terminals of the device to de projected is connected to these terminals. The input audio signal is reproduced by the speakers of the projector. The signal is also output from the AUDIO OUT terminal of the projector.
*When the input signal is stereo signal, connection should be made to both L and R.
*Signals from a monaural device should be connected to only L. That way, the projector’s speakers and the AUDIO OUT terminal produce the same sound from both Land R.
To select the proper audio input for video input:
The video input terminals (AV IN input terminals) can be switched with the projector’s or remote control’s VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.
AUDIO OUT (audio output) terminal (stereo mini jack)
Of input signals inputted to the projector, the audio signal of the device being projected is output. Volume should be adjusted using the VOL.
REMOTE terminal (mini jack)
Connect an infrared remote control extension unit, etc. to this jack.
* For details, consult your dealer.
RS-232C connector (D-sub 9 pin)
This is a
* For details, consult your dealer.
COMPUTER OUT (computer output) connector (D-sub 3-row 15 pin)
The computer input signal projected on the screen is output. A display unit can be used by connecting it to this connector.
13
