Connecting to Various Devices (Cont.)
Connecting the Power Cord (Supplied)
After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet.
Power cord (supplied)
To prevent fire and electric shock, observe the following:
When you do not use devices, pull out their power cords from wall outlets.
Do not connect the devices with power cords other than supplied.
Do not use voltage other than the power voltage indicated. Do not scar, damage, or walk on the power cords. Also, do not put a heavy object on, heat or pull the power cords, otherwise they may be damaged.
Do not insert or pull out the plugs with a wet hand.
Insert the supplied power cord into the power input terminal (AC IN ~) of the projector.
AC IN ~
Insert the plug of the supplied power cord into a wall outlet.
Since the power requirement of the projector is high, be sure to insert the power plug directly into a wall outlet.
To use the projector
Remove the lens cap.
* The lens cap has a string attached and it is fixed to the projector.
Be sure to place the cap on the lens when the projector will not be used for some time.
Lens cap
26
