Panasonic PT-D995U Options menu, To adjust multiple items, repeat steps 4, Adjustment item

Operating the Main Menu (Cont.)

Setting and Adjusting Other Functions (OPTIONS) (Cont.)

Remote control unit

Set (adjust) the desired item with the cursor button or .

To adjust multiple items, repeat steps 4 and 5.

MENU/ENTER button

Cursor buttons

PAGE BACK button

Submenu items

[OPTIONS menu]

The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. Items to be set (adjusted) are different when AV signals are input and when computer-system signals are input.

When you turn the RESIZE function ON, allowing the screen to be enlarged virtually to its full size for projection (resizing display), the video image (resolution) becomes coarse.

Adjustment item

MENU AUTO OFF

LINE DISPLAY

RIGHT LEFT

REV.

TOP BOTTOM INV.

CLAMP

RESIZE

ButtonAdjustment content

Sets whether to clear the menu display automatically a fixed time later or not. (Factory setting : NO)

YES: Clears the display automatically in about 25 seconds.

NO : Does not clear the display automatically.

NOYES

Sets whether to show the line display (Y/C, VIDEO, etc.) at the top of the projected screen or not. (Factory setting : ON)

OFF: Does not show the line-display.

ON : Shows the line display.

(The line display disappears about 5 seconds after it is shown.)

OFFON

Reversesvideoimageright-to-left. (Factory setting : OFF)

OFF: For the front method

ON : For upside hanging from the ceiling

OFFON

Inversesvideoimageupside-down. (Factory setting : OFF)

OFF: For normal set-up

ON : For upside hanging from the ceiling

OFFON

Sets the clamp pulse’s position at the back porch (BP) or on the sink tip (ST). Normally, the clamp is used at BP If, with some PCs or workstations, the screen becomes unstable such as being too dark or too bright, try to switch to ST

(factory setting: BP)

BP : The clamp pulse is positioned at the backporch.

ST : The clamp pulse is positioned on the sink tip.

BPST

When the number of pixels (resolution) sought by the input video is smaller than that (resolution) of D-LA device, the video image is then enlarged to virtually full screen size of D-LA device and projected (resizing display). (Factory setting : ON) Does not work (cannot be set) for video systeminput.

OFF : Does not enlarge the video image for projection. When the number of pixels sought by video image is smaller than that of D-ILA device, projection takes place on a small screen size with a black area around thescreen.

ON : Enlarges virtually to the full screen size of D-ILA device for projection (resizingdisplay).

OFFON

(To be continued on the next page)

46