Basic Operations (Cont.)
Projector’s buttons
VIDEO button
COMPUTER button
Remote control unit
COMPUTER button
VIDEO button
ZOOM (T/W) buttons
2. Selecting the video input to be projected
Press the VIDEO button or the COMPUTER button to switch the input.
Each time you press either button, the selected input changes as
follows.
When you press VIDEO:
Y/CVIDEOY,PB/B-Y,PR/R-Y
When you press COMPUTER:
COMPUTER 1 | COMPUTER 2 |
Remote control unit | Projector |
Screen display
*When the input is switched, the line display (ex. VIDEO) and the source display (ex. NTSC) are shown on the upper part of the screen (they disappear in about five seconds). However, they will not be shown if LINE DISPLAY in “Setting and Adjusting Other Functions (OPTIONS)” on page 45 is set to OFF.
(For setting the source, see page 48.)
•To select the proper audio input for video input
The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.
ATTENTION
DO NOT give any shock to this projector while operating it; otherwise, the
If the shock turns off the
Turn off the power by pressing the MAIN POWER switch, then turn it on again. Now you can operate the projector as usual.
3. Adjusting the screen size
Adjust the screen size with the remote control’s ZOOM (T/W) buttons.
To enlarge the screen size:
Press the ZOOM (W) button.
To reduce the screen size:
Press the ZOOM (T) button.
Remote control unit
The adjustment of the screen size (zoom adjustment) can also be made on the setting menu.
For operating the setting menu, refer to “Making Basic Settings” on page 33.
29
