5.Press the RESET button. Close the motion sensor battery compartment.
6.Secure the sensor in the desired location using the wall mount or table stand.
7.Twist the motion sensor knob to direct the sensor to the position you want.
8.Slide the POWER ON / OFF switch to turn the motion sensor ON or OFF.
9.Slide the ALARM SOUND ON / OFF switch to ON to activate the alarm sound function. The motion sensor alarm will now sound for 20 seconds if it detects movement. Slide to OFF to deactivate this function.
NOTE Once it has power, the motion sensor takes 2 minutes to warm up.
For best results:
•Insert the batteries and select the channel before you mount the sensor.
•Place the sensor out of direct sunlight and moisture.
•Do not place the sensor more than 98 feet (30 meters) from the main (indoor) unit.
•Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture.
•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.
19
You may need to experiment with various locations to get the best results.
WAKE-UP VIBRATION ALARM - VR101A (OPTIONAL)
The vibrating alarm receives a signal from the clock and performs a
The device has a range of roughly 50 feet and has an LED indicator to show data transmission and battery level.
The switch within the vibrating alarm can adjust to alarm 1 or alarm 2, or both. Simply select the alarm time on the clock unit when you want the vibrating alarm to wake you up.
NOTE The vibrating alarm is powered by 2 x
AA1.5V batteries (included). It is also compatible with rechargeable batteries (not included).
RESETTING THE CLOCK
Insert a thin blunt instrument into the hole below RESET to return to the default settings.
EN
RMR939PA English R5 | 19 | 9/21/04, 2:40 PM |
