EN
NOTE If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again in 24 hours.
MOTION ALARM
MOTION ALARM SETTING DISPLAY
The motion sensor icon indicates the motion alarm setting.
1
2
1.Code icon
2.Motion Sensor icon
16
SETTING THE MOTION ALARM
The motion alarm has a security / monitoring function, whereby when the motion sensor detects movement, it sets off the clock alarm for 5 minutes and the backlight will turn on for 10 seconds. The clock will also show which sensor has been activated - Ch.1 or Ch.2 will appear in the top left hand corner of the display.
You can set the motion alarm to be activated over a set period of time i.e. during night time, by entering values next to the Start / Stop Hour in the process detailed below. However, it is important that you set the Code on the clock display to match the Code on the back of the motion sensor(s) so that the items can interact with each other. This process is also detailed below.
1.Press and hold MOTION ALARM for 2 seconds to enter the Motion Alarm Setting Mode.
2.The Code will start flashing. Use the 
and 
buttons to choose the same Code setting as that displayed on the back of the motion sensor. Then press MOTION ALARM to select your chosen option. The start hour digits will start flashing.
3.Enter the value by pressing the 
or 
buttons.
4.Confirm the entry by pressing the MOTION ALARM button and move on to the next setting.
5.Repeat (3 and 4) to set the stop hour, beep / melody and volume.
6.The motion alarm will be on automatically after setting.
RMR939PA English R5 | 16 | 9/21/04, 2:40 PM |
