EN
The default settings are: |
|
Clock Time: | 12.00 PM |
Date: | 1st January 2004 |
Time Offset: | |
Alarm 1 and 2 Time: | 6.00 AM |
Alarm Melody: | #1 with low volume |
Daily Alarms: | Disabled |
Motion Alarm Start Time: | 12.00 AM |
Motion Alarm Stop Time: | 6.00 AM |
Motion Alarm: | Disabled |
Display Setting: | 12hr, MM / DD, °F |
WARNINGS
This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines:
•Never immerse the product in water. This can cause electrical shock and damage the product.
•Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
•Do not tamper with the internal components.
•Do not mix new and old batteries or batteries of different types.
•Do not use rechargeable batteries with this product.
•Remove the batteries if storing this product for a long period of time.
•Do not scratch the LCD display.
NOTE The technical specification of this product and contents of this user manual are subject to change without notice. Images not drawn to scale.
TROUBLESHOOTING
PROBLEM | SYMPTOM | REMEDY |
|
|
|
Clock time | No atomic | Place the clock far |
is not | clock | away from PCs, |
correctly | signal | phones, and other |
set. | reception. | electronic equipment |
|
| and near a |
|
| windowsill. Wait for |
|
| at least 24 hours. |
|
|
|
No alarm. | Alarm does | Turn on the alarm |
| not sound. | setting. |
|
|
|
20
RMR939PA English R5 | 20 | 9/21/04, 2:40 PM |
