Powerware UPS 1000 - 2200 Silencing an Audible Alarm, Alarm or Condition Possible Cause Action

Silencing an Audible Alarm

To silence the alarm for an existing fault, press the button. If UPS status changes, the alarm beeps, overriding the previous alarm silencing. The alarm does not silence if there is a low battery condition.

Alarm or Condition

Possible Cause

Action

The	indicator is	The power cord is not
not on; the UPS does			Check the power cord connections.
		connected correctly.
not start.
		The wall outlet is faulty.	Have a qualified electrician test and repair
			the outlet.
The	indicator is	The UPS is in Standby	Press the On button to supply power to
flashing; power is not		mode.	the connected equipment.
available at the UPS
output receptacles.
The UPS does not		The batteries need charging	Plug the UPS into a power outlet for 24
provide the expected		or service.	hours to charge the battery. After charging
backup time.			the battery, press and hold the		button
			for 3 seconds; then check the		indicator.
			If the	indicator is still on, see "UPS
			Maintenence" to replace the battery.
		The self-test failed	Plug the UPS into a power outlet for at least
			3 hours to charge the battery. After charging
			the battery, press and hold the		button for
			3 seconds; then check the		indicator.
			If the	indicator is still on, shut down
			the UPS and contact your service
			representative.
		UPS internal temperature is	The UPS shuts down automatically in
		too high.	10 seconds. Turn off and unplug the UPS.
			Clear vents and remove any heat sources.
			Ensure the airflow around the UPS is not
			restricted. Wait at least 5 minutes and restart
			the UPS. If the condition persists, contact
			your service representative.
	1 beep every 4	UPS on battery.	The UPS is powering the equipment with
	seconds		battery power. Prepare your equipment for
			shutdown.
	2 beeps every 2	The battery is running low.	3 minutes or less of battery power remains
	seconds		(depending on load configuration and
			battery charge). Save your work and turn off
			your equipment. The alarm cannot be
			silenced.

Table 2. Troubleshooting Guide

1019297	1000 - 2200 VA	21
Revision A	User’s Manual