Special Symbols | Powerware UPS 1000 - 2200 instruction

Special Symbols

The following are examples of symbols used on the UPS to alert you to important information:

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for additional information, such as important operating and maintenance instructions.

RJ-45 RECEPTACLE - For 230V units only: this receptacle provides network interface connections. Do not plug telephone or telecommunications equipment into this receptacle.

This symbol indicates that you should not discard the UPS or the UPS batteries in the trash. The UPS may contain sealed, lead–acid batteries. Batteries must be recycled.

Image 6

Powerware UPS 1000 - 2200 user manual Special Symbols

Contents

UPS 1000 2200 VA User’s Manual Page Powerware 5125 User’s Manual 1000-2200 VA Table of contents Copyright Requesting a Declaration of Conformity Class a EMC Statements VA Models Special Symbols Powerware 5125 Introduction Powerware Installation Installing the UPSInspecting the Equipment Installation UPS Rear Panels Operation and Configuration Operating Modes Standby Mode Normal ModeBuck and Double Boost Mode UPS Configuration Battery ModeSleep Mode Starting the UPS on Battery Turning the UPS Off Initiating the Self-TestCommunication Port Network Transient Protector Network Transient Protector Load Segments VA and 1500 VA Load Segments When to Replace Batteries UPS MaintenanceUPS and Battery Care Storing the UPS and Batteries How to Replace Extended Battery Modules Use the following procedure to replace internal batteries Testing New Batteries Troubleshooting Recycling the Used BatteryAudible Alarms and UPS Conditions Silencing an Audible Alarm Alarm or Condition Possible Cause Action 100% Specifications Dimensions W x D x H Weight Battery