To turn off the radio

Press RADIO OFF (x).

To tune in a station quickly

In step 3, flip and hold the jog lever towards F+ or F– until the frequency indication begins to change. The remote control automatically scans the radio frequencies and stops when it finds a clear station. A short beep will sound in the headphones/earphones and the radio station begins playing.

To improve broadcast reception

For AM: Orient the built-in AM antenna inside the remote control horizontally to obtain optimum AM reception.

For FM: Extend the headphones/earphones cord, which act as the FM antenna.

If the reception is still not good, press and hold FM MODE (RADIO ON/BAND) until “MONO”(monaural) or “LOCAL” appears in the display for best reception.

When you cannot operate the radio

Make sure the remote control is not locked (page 42).

Notes

The radio will not operate if the remote control is not connected to the recorder.

Do not place the remote control close to another electronic device, such as the recorder itself, another radio, a TV, or a computer, as this may cause noise in the reception.

Playback or recording stops when you use the radio.

Use VOL +/– on the remote control to adjust the radio volume.

23