If the following messages flash in the display window, check the messages below.
The messages appear on the display window on the remote control are shown in the parentheses.
BLANKDISC (– – – – – )•An MD with no recording on it is inserted.
DISC ERR (– – – – – )•The disc is damaged or does not contain proper recording or editing data.
—Reinsert the disc. If this fails, rerecord.
DISC FULL (– – – – – )•There is no more space to record on the disc (page 67).
—Replace the disc.
Data Save (–•The MD player is recording information (sounds) from the memory to the disc.
—Wait until this process is completed. Do not expose the player to any physical shock, nor disrupt power supply.
TOC Edit (–•The MD player is recording information (track start and end position) from the memory to the disc.
—Wait until this process is completed. Do not expose the player to physical shock, nor disrupt power supply.
BUSY (– – – – – )•You tried to operate the recorder while it was accessing the recorded data.
—Wait until the message goes out (in rare cases, it may take 2 - 3 minutes).
NAME FULL (– – – – – )•You tried to enter more than 200 letters to label a single track or disc.
•You tried to enter a total of more than 1700 letters for track or disc names.
— Enter the characters within the limit.
69