3 Turn the jog dial downward.
The cursor shifts from the letter input area to the character palette.
The cursor and character alternate.
4 Select a letter and press the jog dial to enter.
The selected letter appears in the letter input area and the cursor moves to the next input position.
The cursor flashes at the next input position.
Functions1) | Operations |
To switch between | Press X. |
capital letters and |
|
small letters. |
|
|
|
1)Functions of the buttons or the control may differ depending on when the cursor is in the letter input area or in the character palette.
5 Repeat step 4, and then enter all characters of the label name.
6 Press the jog dial for 2 seconds or more to enter the title.
You can change the titles by doing the procedure for “Labeling” (page 47).
Notes
•The recorder is able to display, but cannot label using Japanese “Katakana” characters.
•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device (in MD mode only).
The buttons used for character input and their functions are listed below.
Functions1) | Operations |
To move the cursor | Press . or >. |
to the left or to the |
|
right. |
|
|
|
To move the cursor | Turn the jog dial. |
up or down |
|
|
|
To enter a letter. | Press the jog dial |
| (N/ENT). |
|
|
To insert a blank | Press VOL +. |
space. |
|
|
|
To delete a letter. | Press VOL |
|
|
To move the cursor | Press x. |
from the character |
|
palette to the letter |
|
input area. |
|
|
|
48