When using the recorder connected to the computer, make sure to attach the clamp filters in the way described. (You must attach a clamp filter to comply with the applicable EMC standards.) It is unnecessary to attach the clamp filters if you use the unit without connecting it to the computer.
• For the supplied remote control:
• For the optional line cable
(except for the Southeast Asian, African and tourist models)
1 | 2 | 3 |
Refer to step 2 below for the distance from the plug connected to the recorder.
1 Open the clamp filter.
2 Attach the clamp filters as follows.
For the supplied remote control: Wind the cord around the clamp filter once/Approx. 4 cm (1.6 in.) from the plug
For the optional line cable: Pass the cord through the clamp filter/Approx. 1 cm (0.4 in.) from the plug
3 Close the clamp filter. Make sure the clasps are fully engaged.
13