Message

Meaning/Remedy

GROUP FULL

• You tried to create a 256th group on a disc used in Hi-MD mode or 100th

 

group on a disc used in MD mode.

 

, You can create only up to 255 groups (on a disc used in Hi-MD mode)

 

or 99 groups (on a disc used in MD mode) on a disc. Keep the group

 

number within 255 or 99.

 

 

HOLD

• The recorder is locked.

 

, Slide HOLD against the arrow to unlock the recorder (page 18).

 

 

IN MENU

• You pressed a key on the remote control while selecting a menu on the

 

recorder.

 

 

LOW BATTERY

• Batteries are weak.

 

, Charge the rechargeable battery or replace the dry battery (page 17).

 

 

MEMORY OVER

• You tried to record with the recorder placed where it receives continuous

 

vibration.

 

, Put the recorder on a stable place, and start recording again.

 

 

NO

• You selected bookmark play without setting bookmarks.

BOOKMARKED

, Set bookmarks (page 41).

TRACK

 

 

 

NO DIGITAL

• You tried to make a copy from a disc that is protected by the Serial Copy

COPY

Management System. You cannot make copies from a digitally connected

 

source which was itself recorded using digital connection.

 

, Use analog connection instead (page 34).

 

 

NO DISC

• You tried to play or record with no disc in the recorder.

 

, Insert a disc.

 

 

NO DISC

• You tried to erase a setting in the Disc Memory on a disc that contains no

MEMORY

settings in the Disc Memory (page 58).

 

 

NO FILE

• While viewing the file list, you selected a folder that have no folders or

 

files

 

 

NO GROUP

• You selected “Group Erase” with a disc without group setting.

 

, You cannot erase groups with a disc with no groups.

 

• You tried to release a group setting with a disc that has no groups.

 

, Insert a disc with group settings.

 

 

NO INPUT

• The recorder could not detect digital input signals.

SIGNAL

, Make sure that the source is connected firmly (page 21).

 

 

NON GROUPED

• You selected “Group Move” or “Group Erase”, or you tried to label a

TRACK

group while selecting a track that does not belong to a group.

 

, Select a track within a group you want to edit, and then do the editing

 

operation again.

 

 

NOT ENOUGH

• You tried to edit the contents of a 1GB Hi-MD disc with insufficient

POWER TO

battery power for editing (page 75).

EDIT

, Connect the AC power adaptor to the recorder or insert a fully charged

 

rechargeable battery or a new alkaline dry battery.

 

 

NOT ENOUGH

• You tried to record on a 1GB Hi-MD disc with insufficient battery power

POWER TO REC

for recording (page 72).

,Connect the AC power adaptor to the recorder or insert a fully charged rechargeable battery or a new alkaline dry battery.

81