Sony MZ-N1 service manual AbcdGn

MZ-N1

2. NV adjusted values modifying procedure

1)Select manual mode of the test mode, and set item number 336 (see page 14).

Remote commander LCD display

336 AbcdGn **

**: Adjusted value

2)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 8.

3)Press the X key to write the adjusted value.

4)Select manual mode of the test mode, and set item number 149 (see page 14).

5)Press the > key to set item number 151.

Remote commander LCD display

151 Dfct 1 **

**: Adjusted value

6)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 07.

7)Press the X key to write the adjusted value.

8)Select manual mode of the test mode, and set item number 861 (see page 14).

Remote commander LCD display

861 V1 num **

**: Adjusted value

9)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value

becomes 79.

10)Press the X key to write the adjusted value.

11)Select manual mode of the test mode, and set item number 862 (see page 14).

Remote commander LCD display

862 V1 dat **

**: Adjusted value

12)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 00.

13)Press the X key to write the adjusted value.

14)Select manual mode of the test mode, and set item number 863 (see page 14).

Remote commander LCD display

863 V2 num **

**: Adjusted value

15)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes EA.

16)Press the X key to write the adjusted value.

17)Select manual mode of the test mode, and set item number 864 (see page 14).

Remote commander LCD display

864 V3 dat **

**: Adjusted value

18)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 01.

19)Press the X key to write the adjusted value.

20)Select manual mode of the test mode, and set item number 865 (see page 14).

Remote commander LCD display

865 V3 num **

**: Adjusted value

21)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 2C.

22)Press the X key to write the adjusted value.

23)Select manual mode of the test mode, and set item number 866 (see page 14).

Remote commander LCD display

866 V3 dat **

**: Adjusted value

24)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes B9.

25)Press the X key key to write the adjusted value.

26)Select manual mode of the test mode, and set item number 867 (see page 14).

Remote commander LCD display

867 V4 num **

**: Adjusted value

27)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes C9.

28)Press the X key to write the adjusted value.

29)Select manual mode of the test mode, and set item number 868 (see page 14).

Remote commander LCD display

868 V4 dat **

**: Adjusted value

30)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 80.

31)Press the X key to write the adjusted value.

32)Select manual mode of the test mode, and set item number 871 (see page 14).

Remote commander LCD display

871 V5 num **

**: Adjusted value

33)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes CA.

34)Press the X key to write the adjusted value.

35)Select manual mode of the test mode, and set item number 872 (see page 14).

Remote commander LCD display

872 V5 dat **

**: Adjusted value

36)Adjust with the [VOLUME +] key (adjusted value up) or [VOL- UME --]key (adjusted value down) so that the adjusted value becomes 2D.

37)Press the X key to write the adjusted value.

20