Sony MZ-NF610 manual 79

Error message	Meaning/Remedy
LoBATT	• Battery is weak.
	, Replace the dry battery (page 18).
MEMORY	• You tried to record with the recorder placed where it receives
	continuous vibration.
	, Put the recorder on a stable place, and start recording again.
NO CHG	• You tried to charge at a place where the temperature is too high.
	, Charge the battery at a temperature of +5°C (+41°F) to +40°C
	(+104°F).
NoCOPY	• You tried to make a copy from a disc that is protected by the Serial
	Copy Management System. You cannot make copies from a
	digitally connected source which was itself recorded using digital
	connection.
	, Use analog connection instead (page 32).
NoDISC	• You tried to play or record with no disc in the recorder.
	, Insert an MD.
NoEDIT	• You selected “G : Ers” with a disc without group setting.
	, You cannot erase groups with a disc with no groups.
	• You selected, “G : Set”, “G : Rls”, “Move”, or “Erase” while
	recording.
	• You tried to erase the track mark at the beginning of the first track
	or group.
	• You tried to erase a track mark to combine tracks the recorder
	cannot combine (a track recorded in stereo and in mono, for
	example).
	• You tried to overwrite a track marks.
NoMARK	• You selected bookmark play without setting bookmarks.
	, Set bookmarks (page 57).
NO OPR	• You tried to set Auto Time Mark while recording through digital
	connection.
	• You tried to press X or T MARK during synchro-recording.
No SIG	• The recorder could not detect digital input signals.
	, Make sure that the source is connected firmly (page 23).
PbONLY	• You tried to record or edit on a pre mastered MD (Pb stands for
	“playback”).
	, Insert a recordable MD.
Rd ERR	• The recorder cannot read the disc information correctly.
	, Reinsert the disc.

79