Troubleshooting, Adjustment & Service
54” Mower Drive Belt Replacement
1.Remove the mower deck. See Mower Removal and Installation
2.Remove the taptite screws (A, Figure 51) securing the belt covers and remove the belt covers (B, D).
3.Using a spring puller or a small rope loop, release the idler assembly tension spring (A, Figure 53).
4.Remove the old drive belt.
5.Inspect all pulleys for wear or bearing damage.
6.Lubricate the idler arm pivot with
7.Install the new drive belt as shown in the diagram in Figure 52.
8.Complete installation by following steps
| B |
| D |
A | C |
E | A |
| |
Gear Box Mounting | E |
Assy. Removed for | |
Clarity |
|
Figure 51. Mower Deck - 54” Mowers
A.Taptite Screws
B.
C.Spring
D.
E.Alignment Notches
BELT ROUTING VIEWED FROM TOP
FRONT | Outer | Outer |
| Pulley | Pulley |
|
| Drive |
|
| Pulley |
| V Idler | Belt |
|
| |
|
| Double V |
| Center |
|
| Pulley |
|
Figure 52. 54” Mower Belt Routing
A |
Figure 53. 54” Mower Deck - Covers Removed
A.Idler Assembly Tension Spring
34