LUBRICATION
Lubricate the unit at the locations shown in Figures 28 through 33 as well as the following lubrication points.
Grease:
•front axle grease fittings
•steering linkage
•foot pedal
•mower pivots
•mower arbors
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Simplicity “Jiffy Lube” Lithium Grease is recommended,
Oil:
•rear frame assembly pivot
•hydro linkage
•seat adjustment assembly
•brake linkage
•frame pivot points
•mower deck height adjustment linkage
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fit- tings and surfaces clean both before and after lubri- cation.
Every 25 Hours |
FRONT |
Every 100 Hours |
or Yearly |
Figure 28. Engine Drive Shaft
Regular Maintenance
Transmission Filter |
Figure 29. Lubricating the Tractor |
Figure 30. Front Axle Lubrication Points
01
23