Operating the Tractor
PUSHING & TOWING THE TRACTOR
1.Disengage the PTO and turn the engine off.
2.Shift the two speed control into neutral and release the parking brake.
The tractor can now be pushed by hand . TOWING
THE TRACTOR WITH ANOTHER VEHICLE IS NOT RECOMMENDED, AS THE TRANSMISSION WILL BE DAMAGED.
IMPORTANT NOTE
Shift
gpm— | 4 | |
3 | ||
| ||
Flow | 2 | |
Implement | 1 | |
| ||
| 0 |
0 200 400 600 800 1000 Pressure — psi
AUXILIARY HYDRAULIC SYSTEM (OPTIONAL)
NOTE: Some models come with
General
The optional auxiliary hydraulics can be used to control up to two hydraulic cylinders. Refer to the following chart for hydro pump output data.
The auxiliary hydraulic control levers are located in the control pod to the left of the seat (see Figure 6) and con- trol the flow of hydraulic fluid to the quick connectors located under the left footrest.
Control Lever Functions
Moving the left control lever forward (A, Figure 7) will send pressurized hydraulic fluid to the far left quick con- nector.
Moving the left control lever backward (B, Figure 7) will send pressurized hydraulic fluid to the left middle quick connector.
Moving the right control lever forward (C, Figure 7) will send pressurized hydraulic fluid to the far right quick con- nector.
Moving the right control lever backward (D, Figure 7) will send pressurized hydraulic fluid to the right middle quick connector.
A |
B |
A.Control Levers
B.Quick Connector Panel
L R
A.
B.
C.
D.
Figure 7. Auxiliary Hydraulic System Function(Levers shown as viewed from Operator’s position when seated on tractor. Quick Connect panel shown as viewed from front of unit.)
14
