Sony MZ-NF610 disc, time, time, track, Press, Press, cursor, labeling, Functions, character, Press END, Press END, To cancel, “T : Name”, “D : Name”, Operations

4 Press . or > repeatedly until the following item appears in the display, and then press ENTER.

When labeling a	“T : Name”
track
When labeling a	“D : Name”
disc

The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled.

_

The cursor flashes.5 Press VOL + or – to select a letter and press ENTER.The selected letter appears and the cursor moves to the next input position.

The buttons used for character input and their functions are listed below.

Functions	Operations
To select a	Press VOL + or –.
character
To enter a letter	Press ENTER.
To enter a name	Press ENTER for 2
	seconds or more.
To insert a blank	Press END
space before the	SEARCH and press
cursor	VOL + at the same
	time.
To delete a letter	Press END
	SEARCH and press
	VOL – at the same
	time.
To switch capital	Press X.
and small letters.
To cancel	Press x or MENU.
labeling.

6 Repeat step 5, and then enter all characters of the label name.7 Press ENTER for 2 seconds or more.A track or disc is labeled.To return the preceding settings

Press x.

To cancel labelingPress x for 2 seconds or more.

Note

When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically.

Re-labeling recordingsFollow the procedure of the “Labeling” (page 38) to relabel a name.

Note

The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device.

For the remote control operation, see page 58.

39