Checking the remaining time or the recording position

You can check the remaining time, track number, etc. when recording or during stop.

When you operate the recorder with the supplied remote control, use the buttons and controls shown in parentheses.

<MENU,

EDIT

ENTER

ENTER

>/.

1 While the recorder is recording or stopped, press ENTER (EDIT for 2 seconds or more), press <MENU,(flip the lever towards >or .) repeatedly until “DISPLAY” flashes in the display, and then press ENTER (ENTER) again.

2 Press <MENU,(flip the lever towards >or .) repeatedly until the information you want flashes in the display.

Each time you press MENU,(flip the lever towards .), the display changes as follows.

continued

31