•Voltage of the power supply is too high (The supplied AC power adaptor is not used).
—Use the supplied AC power adaptor.
HOLD
•The recorder is locked.
—Move HOLD against the arrow to unlock the recorder (pages 12, 38).
LOW BATT•Battery is weak.
—Charge the rechargeable battery or replace the dry battery (page 11).
MEM OVER•You tried to record with the recorder placed where it receives continuous vibration.
—Put the recorder on a stable place, and start recording again.
NO COPY•You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection.
—Use analog connection instead (page 23).
NO DISC•You tried to play or record with no disc in the recorder.
—Insert an MD.
NO SIGNAL•The recorder could not detect digital input signals.
—Make sure that the source is connected firmly (page 14).
P/B ONLY•You tried to record or edit on a premastered MD (P/B stands for “playback”).
—Insert a recordable MD.
PROTECTED•You tried to record or edit on a MD with the tab in the record- protect position.
— Slide the tab back (page 54).
61