GB
24
Preparing the camera
• The power for the flash is provided from the camera. When the camera is charging
the flash, blinks on the LCD monitor. You cannot press the shutter button
when this icon is blinking.
• Plug the flash fully into the accessory terminal of the camera, and fasten the screw
securely. Make sure that the flash is attached to the camera securely.
x

Attaching the extender (when using the E18 – 200 mm lens)

• Attach only the supplied flash to the extender.
Notes
If you attach the flash directly to the camera,
images will be partly shadowed by the lens.
To avoid this situation, attach the extender.
1Attach the extender to the camera
securely.
2Attach the flash to the extender and
fasten the screw.
Note
zCarrying the flash
The flash case can be conveniently attached to
the shoulder strap.
Put the flash in the case when you are not using
it to protect it from harm.