Getting Started

Supplied Items

Check the following items.

The built-in battery is pre-installed in the player.

Installing CONNECT Player

Log on using an account with Administrator privileges, connect your computer to the Internet, and then insert the supplied CD-ROM into your computer’s CD drive. The set-up program starts automatically, and the Main Menu appears.

Headphones (1)

USB cable (1)

Note

Headphone extension cord (1)

AC power cord (1)

AC power adaptor (1)

CD-ROM* (1)

–CONNECT Player software

–Operation Guide (PDF file)

* Do not attempt to play this CD-ROM in an audio CD player.

Quick Start Guide (this manual) (1)

Hints

•Make sure that your computer is connected to the Internet before starting the installation, because the installer will automatically download and install any available CONNECT Player updates.

•The CONNECT Player software includes an automatic update feature, which downloads from the Internet the latest updates for CONNECT Player, ensuring you always have the latest

features. For detailed information about the latest updates, visit the customer support Web site (page 13).

To install CONNECT Player

Connect your computer to the Internet, and then click “Install CONNECT Player”, and then follow the on-screen instructions. Pay close attention to the displayed notes and instructions.

The installation typically takes 20 to 30 minutes, depending on your computer’s configuration. When the installation is finished, restart your computer if instructed to do so by the on-screen instructions.

•Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately.

If any problem occurs during the installation, see “When installation is not successful – Q&A” (page 12).

To install the Operation Guide (PDF file)

Click “Install Hardware Operation Guide (PDF)”, and then follow the on-screen instructions.

10

11