“MAN” blinks.
4 Rotate the Shuttle switch to select “SET >.”VOL :SET>
5 Press the Nx button to confirm.“VOL LO xx”* blinks.
*“xx” stands for numeric values of the volume level.
VOL LO xx
6 Set volume levels of three preset levels: LO, MID, or HI.1Press the VOLUME +/– button to set the volume level of the LO preset.
2Rotate the Shuttle switch to select “VOL MID xx,” and then press the VOLUME +/– button to set the volume level of the MID preset.
3Rotate the Shuttle switch to select “VOL HI xx,” and then press the VOLUME +/– button to set the volume level of the HI preset.
7 Press the Nx button to confirm.8 Press the MENU button.The display returns to the normal screen. With these settings, you can adjust the volume level to any of three preset levels: LO, MID, or HI.
To cancel the Menu mode
Select [RETURN] in the menu screen or press the MENU button.
Note
If AVLS (page 28) is set, the actual volume may be lower than the settings.
Releasing AVLS returns the volume to the preset level.
Switching to the manual mode
1 Press the MENU button.
The menu screen is displayed.
2 Rotate the Shuttle switch to select “VOL: SET.”
| VOL | :SET> |
|
|
|
|
|
|
|
|
|
3 Press the Nx button to confirm.
“SET >” blinks.
4 Rotate the Shuttle switch to select “MAN.”VOL |
| :MAN |
| ||
|
|
|
5 Press the Nx button to confirm.
6 Press the MENU button.The display returns to the normal screen. With this setting, you can adjust the volume level by pressing the VOLUME +/– button.
30