Repeat mode

Playing specified sentences repeatedly (Sentence Repeat)

This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. This is useful for language-learning material which has no background music.

zTip

The default repeat counts setting is 2 times for one sentence. But you can change the repeat counts setting. Refer to “Setting the repeat counts” on page 21.

3 Press the REPEAT/SOUND button to place the setting point during playback.

The Network Walkman detects spoken sections and non-spoken sections from the set point, and Sentence Repeat starts. (The spoken section is repeated once (during detection), and the setting is counted.)

01 0 0:12

Notes

• You cannot use Sentence Repeat in the Group

mode, or when the current time is displayed.

• A spoken or non-spoken section of less than 1

second will not be detected.

Shuttle switch Press (Confirm)

to

Nx button

• If a non-spoken section is not detected until the

track end, the track end point is recognized as a

non-spoken section and Sentence Repeat begins

from the previous spoken section.

(+/>)

e

 

do

 

M

pu orG

to

(./–)

e d

o

REPEAT/SOUND button

1 Select the Sentence Repeat mode (SENTENCE Rep) (page 17).

2 Press the Nx button to start playback.

To clear the setting point

•Press the REPEAT/SOUND button during Sentence Repeat playback.

•Press the MENU button during Sentence Repeat playback.

•Select the Group mode by pressing the GROUP button during Sentence Repeat playback.

•Select the previous or next track by rotating the Shuttle switch during Sentence Repeat playback.

(The Sentence Repeat mode is not canceled.)

To cancel the Sentence Repeat mode

Change the Repeat mode in the menu screen (page 17).

20