5 Press (PUSH) of the Seesaw key.
“VOL LO xx”* blinks.
* xx is a numeric value.
VOL L O x x
6 Press the “VOLUME +/–” button to set the settings of LO, MID, or HI.
1Sets numeric of LO.
2Press B to display “VOL MID xx,” and set it using
3Do the same to set “VOL HI xx.”
7 Press (PUSH) of the Seesaw key.
8 Press the MENU button.
The display returns to normal.
While the above settings, the volume can be adjusted to LO, MID, or HI.
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU button.
Note
If AVLS is set (page 14), the volume may be lower than previous settings.
To turn off the beep sound (BEEP)
BEEP ON: a beep will sound to indicate that operation has been accepted.
BEEP OFF: no beep sound will be heard.
1 Press the MENU button.
The menu is displayed.
R E P : O F F
2 Press b or B of the Seesaw key to display “BEEP : ON.”
B E E P : ON
3 Press (PUSH) of the Seesaw key.
“ON” blinks.
4 Press b or B of the Seesaw key to display “OFF.”
B E E P : O FF
5 Press (PUSH) of the Seesaw key.
6 Press the MENU button.
The display returns to normal.
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU button.
To turn on the beep sound
Select ON in step 4.
Operations Advanced
continued 17