21GB
Getting Started

Preventing Accidental Operation – HOLD

Locking the buttons of the

PCM recorder

Slide the POWER/HOLD switch in the
direction of “HOLD.”
“HOLD” will appear for approximately 3
seconds and all the functions of the buttons
of the PCM recorder are locked.

Unlocking the buttons of the

PCM recorder

Slide the POWER/HOLD switch towards
the center so that all buttons will be
unlocked.
PNote
When the HOLD function is activated during
recording, all the functions of the buttons of
the PCM recorder are locked to prevent
accidental operation. To stop recording, cancel
the HOLD function first.
zTip
Even if the HOLD function is activated, you
can start, pause, or stop recording, or add track
marks by using the remote commander
connected to the PCM recorder.