Sony PCV-LX900 manual To replace the Pen tip, Replacing the pen tip

VAIO Pen Overview

Your VAIO Pen, eraser, and the upper/lower switch positions are programmable.

By default, the basic functions performed by the VAIO Pen are:

❑Pointing — Place the tip of the pen anywhere on the pen tablet screen and the screen cursor will automatically correspond to that point.

❑Clicking — Tap the pen tablet screen once with the tip of the pen, or press the pen tip against the screen with enough pressure to register a single click.

❑Double clicking — Quickly tap the pen tablet screen twice in the same place with the tip of the pen. You can also register a double click by pressing the upper switch position of the pen’s rocker switch.

❑Dragging — Point to and select an object by pressing the pen to the pen tablet screen. Slide the pen tip across the tablet to move the object to the desired location. To select text, point to the beginning of the text, and then drag the pen across the tablet until all of the desired text is highlighted.

To replace the Pen tip

Your VAIO Pen is supplied with pen tip replacements. The pen tip wears with normal use and must be replaced when the tip becomes too short or develops a flat point. Follow these steps to replace the pen tip:

1Clasp the worn pen tip with the pen tip removing tool and pull it straight out of the VAIO Pen barrel.

2Slide the flat end of a new pen tip straight into the barrel, pushing the tip firmly until it stops.

Replacing the pen tip

Step One Step Two

23