Upgrading your VAIO computer

n N

Guide

 

 

78

Adding / replacing a memory module

 

User

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your

 

Desktop

dealer.

 

To add or change a memory module, proceed as follows:

 

 

 

VAIO

1

Shut down the computer, unplug it, and remove any peripheral

 

 

devices.

 

 

 

 

Sony

2

Wait for the computer to cool down, then open the unit (see

 

 

Removing the cover (page 72)).

 

 

 

 

 

3

Gently place the unit on its side.

 

 

4

To remove an existing memory module, release the end latches and

 

 

 

gently lift out the module, as shown.

 

 

5

To insert a new memory module, remove it from its anti-static

 

 

 

package, handling it only by the edges.

 

 

6

Locate the notch on the bottom edge of the memory module.

 

 

7

Align the memory module over the slot, making sure the module is

 

 

 

facing the correct way.

 

 

8

Press evenly against the memory module's upper corners. The end

 

 

 

latches snap into position automatically.

 

 

9

Reinstall any add-on cards or components you removed.

 

 

10

Replace the cover as described in Replacing the cover (page 80).

 

✍There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.

!Use only PC2100 (DDR266) DDR-SDRAM DIMM modules.