About Add-on Card Installation

Your computer may have one or more open expansion slots, depending on the model configuration. An expansion slot enables you to install add-on cards to expand the functionality of your system. The length of the add-on card should not exceed 9.05 inches.

Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain preinstalled add-on cards.

Observe the proper safety precautions when you add cards to your Sony computer. See Before upgrading your computer.

Installing an add-on card

1.Shut down your computer and turn off all peripheral devices, such as your printer.

2.Unplug your computer and any peripheral devices.

3.Remove the side panel. See Removing the side panel.

4.Locate an available expansion slot. Remove the slot cover's screw, and then remove the slot cover.

When removing a slot cover, be careful not to damage components on the system board or add-on cards. You may need to temporarily remove add-on cards or other components that may be next to the slot cover you want to remove.

Removing the slot cover

5.Install the add-on card by inserting it into the expansion slot and secure it with the screw from the expansion slot cover.

Installing an add-on card

Page 37