2.Unplug your computer and any peripheral devices.

3.Remove the side panel. See Removing the side panel.

4.Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.

5.Remove the memory module from its anti-static package, handling it by the the edges.

6.Locate the notch on the bottom edge of the module and align it over the open memory slot.

7.Firmly insert the bottom edge of the memory module into the slot.

8.Press down evenly against the module's upper corners. The end latches snap into position, holding the module in place.

To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure. The module clicks into place.

9.Reinstall any components or add-on cards you may have removed.

10.Replace the side panel. See Replacing the side panel.

Page 40