Chapter6

146 Saving and Loading User Files
Chapter 6 Saving and Loading the User Setting Data
Saving and Loading the User Setting Data

Saving and Loading User

Files

The camcorder is equipped with a “Memory Stick” slot,
which enables you to save the settings in the USER menu
as a user file onto the “Memory Stick”. You can load these
files from the “Memory Stick” for immediate recall of a
particular setting configuration. In addition to user files,
you can save scene files, lens files and ALL files in a
“Memory Stick”.
When a menu is displayed, you can set up the camcorder
so that inserting a “Memory Stick” automatically jumps to
the appropriate file-related menu page.
For details about scene files, see “Saving and Loading
Scene Files” on page 150.
For details about lens files and ALL files, refer to “Menu
List” on page 111.

Handling the “Memory Stick”

The “Memory Stick” can be inserted to or removed from
the camcorder with the power turned on or off.
“Memory Stick” usable with this
camcorder
With this camcorder, you can use a “Memory Stick” whose
capacity does not exceed 128 MB.
For details, see “About a “Memory Stick”” on page 174.
To insert a “Memory Stick”
1
Open the “Memory Stick” slot cover on the back of the
camcorder.
2
Insert the “Memory Stick” with its label side facing the
“Memory Stick” logo on the camcorder.
If it does not fit into the slot properly or if there is some
resistance when you insert it, the ���Memory Stick” may be
turned around or upside down. Do not force the “Memory
Stick” into the slot. Confirm the direction of the notch and
arrow on the “Memory Stick” before inserting the
“Memory Stick”, and then try inserting it again.
To remove the “Memory Stick”
1
Check that the access indicator is not lit, then gently
press in the “Memory Stick” once and release.
The “Memory Stick” pops out.
Note
Label side of “Memory Stick”