PFV-SP3300
1-8 (E)
1-7. Matching Connector/Cable
When external cables are connected to the connectors on the PFV-SP3300 rear panel, the hardware listed
below (or the equivalent) must be used.
PFV-SP3300 side connector Matching connector/cable
Print on Connector type Connector type Sony Part Number
REMOTE BNC, 75ZBNC, 75Z1-569-370-12
REF IN A/B Belden 1694 coaxial cable –
STATUS OUT D-sub Mini 15-pin, Female D-sub Mini 15-pin, Male –
1-8. Signal Inputs/Outputs
The input and output signals of the connector on the rear panel are as shown here:
STATUS OUT (D-sub Mini 15-pin, female)
Pin No. I/O Signal Function Description
1 O PS-A ERROR OUT State of power unit A The output of power unit A is abnormal.
Normal: Low level The fan of power unit A stops.
2 O PS-B ERROR OUT State of power unit B The output of power unit B is abnormal.
Normal: Low level The fan of power unit B stops.
3 O FAN ERROR OUT State of frame ventilation fan The frame ventilation fan stops.
Normal: Low level
4 O BOARD ERROR OUT Error status output of Error output from optional board
optional board Overpower consumption from optional
Normal: Low level board
5 O BOARD WARNING OUT Warning status output of Warning output from optional board
optional board
Normal: Low level
6 to 13 I/O GPIN/OUT 1 to 8 GPI, Not used
14, 15 – GND
1-7. Matching Connector/Cable
1-8. Signal Inputs/Outputs
51
10 6
15
< External view >
11