Sony PFV-SP3300 Section 1 Installation

1-1 (E)

PFV-SP3300

Section 1 Installation

Operating temperature +5 dC to +40 dC

Performance temperature +10 dC to +35 dC

Humidity 10 to 90 % (No condensation)

Mass: PFV-SP3300 Approx. 10 kg

(Without the optional unit and

board)

HK-PSU03 Approx. 2 kg

.To prevent overheating of PFV-SP3300, ensure that

there is good air circulation around the unit.

.Do not put the unit in a place subject to excessive lamp

smoke, vapor, moisture, or dust.

Install in a stable location.

Installation on unstable or tilting surface may cause the

unit fall off, resulting in injury.

Power voltage AC 100 V to 240 V

Power frequency 50 Hz or 60 Hz

Current consumption 3.5 to 1.5 A

Rush current AC 100 V IN : 15 A

AC 240 V IN : 55 A

AC power supply is required a capacity which is commen-

surate with rush current.

If the capacity of the AC power supply is not enough, the

breaker of AC power on the supply side may operate or

this unit may not operate normally.

For customers in the U.S.A. and Canada

Required Part

1Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11

For customers in the United Kingdom

Required Part

2Power cord, 250 V 10 A (2.5 m) : ! 1-782-929-11

For the customers outside of the area as shown above,

please contact your local Sony Sales Office/Service Center.

.Use a specified power cord only.

Be sure to use a recommended power cord to avoid fire

and/or an electric shock.

.Ground the unit for your safety.

Be sure to attach a ground wire to avoid an electric shock.

AC inlet

2AC inlet