1-7 (E)
PFV-SP3300
n
The maximum depth of an adaptor is 750 mm.
The minimum depth of an adaptor is 595 mm.
3. Firmly lay the right and left adaptors in the rack with
the specified six screws.
(Following figure is case of left side.)
4. Fasten the length adjustment screws which are
loosened in step 2.
5. Remove the front panel. (Refer to Section 1-4.)
6. Align the crook of the each rack bracket on the side
panels of the unit with the rail, then slide the unit
backward.
n
Each rack bracket covers the rails as shown in the
figure below.
1-6. Rack Mounting
Front
Rear
B 4x10
3U
31.75
31.75
RMM-10
B 4x10
Rail Rail
Rack bracket Rack bracket
7. Fix the unit to the rack with the specified screws.
8. Reinstall the front panel.
B 5x12
B 5x12