Tip
You can have the player go on the next day at the same time. Just press STANDBY until the t indication appears in the display. The preset settings remain until you reset them.
Note
The timer mode is canceled:
–when you press ( button of the tape player while music plays in the timer mode.
–when you select “TAPE” using
FUNCTION.
6 Press TUNING/TIME SET + or – to set the volume, then DISPLAY•ENTER MEMORY.
7 Press STANDBY.
The t indication lights up and the power goes off.
At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter the standby mode.
To check/change when the playback will start
Press WAKE UP, then DISPLAY•ENTER MEMORY. Each time you press DISPLAY•ENTER MEMORY, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and reenter it.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer playback will start at the preset time.
In case of the radio, however, if you listen to the station which is different from the one you tuned in step 1 on page 20, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.
To stop play
Press POWER.
Timer The
TheTimer 21