Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 531 - 1,602 kHz (Australian model) 530 - 1,710 kHz (Other models)
IF
FM: 10.7 MHz
AM: 450 kHz Aerials
FM: Wire aerial
AM: External aerial
Recording system
Approx. 120 s (sec.) with Sony cassette
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm (4 in.) dia., 3 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (excluding US model)
4.5W + 4.5 W (at 3 ohms, 10 % harmonic distortion)
Power requirements
For personal component system:
230 V AC, 50 Hz (Australian model)
120 V AC, 60 Hz (Other models) For remote control:
3 V DC, 2 size AA (R6) batteries Power consumption
AC 23 W (Australian model) AC 18 W (Other models)
Dimensions (incl. projecting parts)
Player: Approx. 160 × 245 × 215 mm (w/h/d) (6 3⁄8 × 9 3⁄4 × 8 1⁄2 inches)
Speaker: Approx. 150 × 245 × 175 mm (w/h/d) (6 × 9 3⁄4 × 7 inches)
Mass
Player: Approx. 2.6 kg (5 lb. 12 oz)
Speaker: Approx. 1.1 kg (2 lb. 7 oz) Supplied accessories
Remote control (1) AM loop aerial (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
Additional Information | 31 |
|
|