
Editing recorded tracks on the MD 45
Editing recorded tracks on the MD
Labeling after recording
To label an MD or a track, operate as follows. You can
input up to 100 characters for each label.
1When you label an MD, insert the MD you want to
label and stop operation.
When you label a track, play the track you want to
label.
2Press EDIT repeatedly until “Disc Name” or
“Track Name” appears in the display, and press
YES•ENTER.
When you label an MD, select “Disc Name”.
When you label a track, select “Track Name”.
3Label the MD or the track according to steps 3 and
4 on page 43.
4After completing an entire name, press YES•
ENTER.
The name is labelled on the MD.
To change the name
According to step 1 on this page, make the disc name
or the track name you want to change appear in the
display. Replace the old name with a new one, and
press YES•ENTER.
Tip
When using an MD
that has been already
labeled, a disc name or
a track name appears in
the display at the time
of labelling. Change the
name according to step
3 on page 43, if
necessary, then press
YES• ENTER to
confirm the new name.