Installing the dust cover
Insert the hinges on the dust cover into the hinge pockets on the rear of the cabinet.
the direction of arrows.
When the power is supplied after assembling or moving the turntable
The turntable sometimes rotates and the torn arm descends to the platter even if START is not pressed. If this occurs, press STOP to return the tone arm to the arm stand.
Getting Started
Assembling the Turntable
4
2
1 3
Hooking up the Turntable
The phono cables come attached to the rear of the cabinet.
1 Connect the cable with the red plug to the right PHONO IN R input jack on the amplifier and connect the cable with the white plug to the left PHONO IN L input jack.
Amplifier
L | PHONO IN |
|
R
1Move the metallic parts inside the larger gear in
Mains lead hookups
Connect the mains lead to an AC wall outlet after completing all of the previous connections.
/to a wall outlet
2Carefully, place the platter on the spindle.
3Using the ribbon, loop the drive belt around the motor pully. After looping the belt, do not forget to remove the ribbon.
4Place the rubber mat on the platter.
4